Composing Codes at Blazing Speeds

• Programming Environment (IDE) for the BlazingCore Hardware.
• Completely FREE
• Plenty of Libraries that natively support OLED Screen, Touch Screen, CMOS Cameras, MMC cards, Audio Modules, Accelerometers etc..
• Plenty of Online Resources and Tutorials
• Powerful Compiler
• VBasic Minor Programming Language
• User-Friendly U.I
• Built in Syntax Highlighter and Intellisense Helper

Plenty Of Libraries

Find Out More »

User Friendly

Find Out More »

Plenty Of Online Resources

Find Out More »

BCore100

The BCore100 is based off the PIC32 series of chips by Microchip, making full use of its high-speed I/O toggling rates , efficient number crunching capabilities and large reserves of internal memory.

Blazingcore OS features Native Hardware Support for;

• Onboard External Serial Data Flash Memory Chip (options of 1/4/8 MB)
• External Serial SRAM
• MMC(SD-Compatible) FAT16/FAT32 Cards
• 2.83" AMOLED w/ Touch Screen
• C3038 OV6630 CMOS Camera Module
• VS1053B MP3 Audio Module
• ADXL335 3-Axis Accelerometer

*(Modules available seperately.)

BCore100 Features:

• Core Running at 80Mhz
• BlazingCore Operating System onboard
• Code execution speed of 1 - 5 Million Lines per second.
• *Line: Contains Multiple Instructions per Line
• 110KB of Internal User Memory
• External Memory Support for:
  
  • Serial Data Flash (up to 8MB)
  • MMC (up to 16GB)
  • Serial SRAM (32K)
• 67 I/O pins
• Up to 5 UARTs
• 5 PWM Pins
• 2 SPI Buslines
• 16 channels of ADC
• 10bit ADC Resolution
• 2 Interrupt Pins
• Low Power: System runs on regulated 3.3V
• I/O sink-source 18mA
• Digital I/O pins are 5V Tolerant
• Supports Sleep, Wake, Pause and Run Mode
• Plenty of Native & Optimized Software & Hardware Libraries
• Programming Port: Serial RS232 (USB to UART interface)
• Programming Language: VBasic - minor
• Programming Environment: Sonata IDE

FI40/ FI28

The FlamingICE™ Family Series is AIS Cube’s line of microcontrollers whose core is a high performance, 16 bit Digital Signal Processor, running on the FlamingICE Operating System (FIOS) at 20 MIPS (million instructions per second).

It's Core is based off the dsPIC30F series of chips by Microchip, making full use of its high-speed I/O toggling rates and superb peripheral control.

FI40/ FI28 Features:

• Core Running at 40Mhz
• FlamingICE Operating System onboard
• Code execution speed of 20 MIPS.
• 20KB of Internal User Memory
• External Memory Support for EEPROM
• Up to 23 I/O pins
• Up to 2 UARTs
• 1 SPI Busline
• Up to 13 channels of ADC
• 12bit ADC Resolution
• Up to 4 PWM pins
• System runs on regulated 3.3/5V
• I/O sink-source 25mA
• Plenty of Native & Optimized Software & Hardware Libraries
• Programming Port: Serial RS232 (USB to UART interface)
• Programming Language: VBasic - minor
• Programming Environment: FIDE

BlazingCore

Operating System for our 32bit Microprocessor Family

With Superior Number Crunching Abilities And Peripheral Handling On Our Embedded OS, Rapid Prototyping Is Now Easy, And Blazing Fast.

FlamingICE

Operating System for our 16bit Microprocessor Family

Say Hello To Total Peripheral Control