Getting Started with the BCore Board & C3038 Camera Module

Overview: We show you how to connect the C3038 Camera Module to the BCore100 Board for plug-and-play usage

What you would need:

Hardware

• BlazingCore100 Microcontroller Board
• c3038 Camera Module
• Female-Female Jumper Wires

Hardware Setup
Follow the Hardware Setup as illustrated below by connecting the pins (colour coded so its easier to follow) from the camera to the BCore100 Board (REV.B).

Use the jumper wires and connect the module and board accordingly and you should be fine.

To start grabbing frames from the Camera, view our other tutorials for the camera here.